Debugging flushing oil TF46B CN
EH FEOLUBE TF46B CN
Debugging and flushing oil EH FEOLUBE TF46BCN is specially manufactured for debugging or flushing the HP EH system in steam turbines. The main component of EH FEOLUBETF 46B CN is isobutyl triphenyl phosphate, which contains no triphenyl phosphate (TXP). It has obvious solvent effect and is easy to carry solid pollutants in the system. In order to obtain good flushing effect, it is suggested that the EH system be fully flushed, and the flushing solution should be discharged as soon as possible after flushing. EH FEOLUBETF 46B CN is compatible with other GREATLAKES series fire-resistant hydraulic control fluids. A small amount of residual EH FEOLUBETF 46B CN will not have any influence on the running oil, which can ensure the safe operation of the unit.
Main advantages of EH FEOLUBEHYD TF46B CN: high ignition point, flame resistance, excellent cleanliness, no defoamer and extreme pressure additive, and no corrosiveness.
| Type | Parameter | Measurement standard |
| Chrominance Hazen | 30 | ASTM D1500 |
| Proportion(20℃), g/mL | 1.14 | DIN51757 |
| Kinematic viscosity(40℃), mm2/s | 44 | DIN 51562 |
| Pour point,℃ | -25 | DIN ISO3016 |
| Acid value, mgKOH/g | 0.04 | ISO6619 |
| Moisture, ppm | 300 | ISO760 |
| Chlorinity, mg/Kg | 11 | Micro-coulomb method |
| Particle pollution degree, SAE A-6D | 3 | ISO4406 |
| Electrical resistivity(20℃), Ω·cm | 1×1010 | ASTM D5682-18 |
Foam characteristic programⅠ，mL/mL Foam characteristic programⅡ，mL/mL Foam characteristic programⅢ，mL/mL | 10/0 0/0 10/0 | ISO6247 |
| Air release value(50℃), min | ＜3 | ISO9120 |
| Flash(ing) point℃ | ＞240 | DIN ISO2592 |
| Self-ignition point℃ | ＞530 | ASTM D92 |